What the system should handle in this environment.
- Surface and edge defect contrast
- Part orientation checks
- Dimensional stability
- Feeder route for variant parts
Industry application
Camera, lighting and 3D routes for molded plastic defects, flash, short shot, surface marks and dimensions.
Related solutions
Build automated visual inspection systems for defect detection, presence checks, surface inspection, orientation, measurement and repeatable pass/fail output.
SolutionPlan a complete vision inspection system for defect checks, presence, measurement, barcode reading and pass/fail output.
Industry RFQ
Send part images, sample defects, line speed, target accuracy and current station constraints.
Request engineering RFQ| Model | Family | Parameter | Value |
|---|---|---|---|
| DY-RS3475-W | Machine Vision Lighting | Power | 2W |
| DY-RS3475-W | Machine Vision Lighting | Light opening | 34mm outer / 10mm inner / 19mm height |
| DY-RS3475-W | Machine Vision Lighting | Color temperature | 6000-10000K |
| DY-FA0401C | Machine Vision Lenses | Focal length | 4mm |
| DY-FA0401C | Machine Vision Lenses | Sensor size | 1/1.8 inch |
| DY-FA0401C | Machine Vision Lenses | F.NO | 2.0-C |
| DY-GE307GM | Industrial 2D Cameras | Resolution / frame rate | 2048 x 1536 MAX @37FPS |
| DY-GE307GM | Industrial 2D Cameras | Effective pixels | 3MP |
| DY-GE307GM | Industrial 2D Cameras | Pixel size | 3.4 x 3.4um |
| DY-F90 | Flexible Feeders & Workstations | Dimensions | 321 x 98 x 206mm |
| DY-F90 | Flexible Feeders & Workstations | Plate inner size | 71 x 111mm |
| DY-F90 | Flexible Feeders & Workstations | Plate sidewall height | Standard 19, 13 and 9mm, customizable |
Industry FAQ
Fix the part reference and compare identified molding defects across allowed positions. A controlled silhouette can support edge checks, but fixture shadow, gloss and pose must not be labelled as material defects.
Decide whether appearance or geometric depth controls acceptance. If depth or dimensions matter, assess an independently validated measurement; a dark patch does not by itself establish depth.
Validate the part, tray, lighting, image model, calibration and gripper as a matched changeover set. One learned sample does not establish all orientations, overlap handling or reliable pickup.